6
Running an Xcalibur Experiment by Using ETD
Nth Order Double Play (ETD) Experiment
44
MS/ETD System Getting Started Guide
Thermo Scientific
3. In the left Available Devices pane, click the
LTQ XL MS
icon (shown in
LTQ Velos MS
icon to open the New Method page for the device.
Figure 30.
New Method page for the LTQ XL/ETD system
4. Under Select ETD Experiment Type, click
Nth Order Double Play (ETD)
to open this
dialog box (
).
The Initialize Method with Additional ETD Scan Event check box is selected as the
default setting.
Figure 31.
Nth Order Double Play dialog box
5. In the Analyze Top N Peaks box, enter the number of top peaks.