Thermo Scientific Dionex, Operator'S Manual

Page: 204 / 228

Dionex Integral Systems Operator’s Manual
192
Doc. 065250-06 03/2020
F.2.1 Installing the Liquid Level Sensor on the Reservoir or
Container
1. Remove the label from the
back of the liquid level sensor
(see
Figure F-1 ).
Figure F-1. Sensor with Label
2. Remove the paper backing
from a piece of dual-lock
tape. Press the tape onto the
sensor in the place where the
label was removed (see
Figure F-2 ).
Figure F-2. Sensor with Dual-Lock Tape
3. Wrap the appropriate cinch strap around the reservoir or NOWPak
Bag-in-a-Bottle container and loosely secure it. Then, slide the cinch
strap off the reservoir or NOWPak container.
4. Remove the paper backing
from a piece of dual-lock
tape. Press the tape onto the
back of the cinch strap, near
the buckle (see
Figure F-3 ).
Figure F-3. Cinch Strap with Dual-Lock Tape Attached
Remove this
label from
the sensor
Dual-lock tape
attached to the
sensor
Dual-lock tape
attached to back
of cinch strap