Thermo Scientific Dionex AS-DV, Operator'S Manual

Page: 62 / 132

Dionex AS-DV Operator’s Manual
52
Doc. 065259-05 10/12
Example: Using the From Sequence Volume Option
When From Sequence is selected for the sample delivery volume, the
Dionex AS-DV calculates the delivery volume using the formula shown
in the
Total Volume Delivered Estimator . In this case, the
DeliverSample command is included without a specified volume.
In the example shown in Figure 3-17 , the loop volume is 25
P
L, the delay
volume is 125 P L (the default), and the flush factor is 8. This provides a
delivery volume of 1200
P
L. This example allows four injections per
filled 5.0 mL vial.
Notes:
•
In Loop Mode , you can increase or decrease the delivery volume by
entering a different Flush Factor .
Figure 3-17. Sample Preparation Options (Chromeleon 6.8 Version Shown):
Estimating the Delivery Volume Example