Thermo Scientific DensityPRO, Application Manual

Page: 79 / 101

Appendix D
DensityPRO Commands
Note If you are not using the NI-FBUS Configurator, reference the
documentation that came with your host system. ▲
In the NI-FBUS Configurator, open the AI_TRANSDUCER block, and
click the
Others tab. Click on DPRO_CMD to view the list of available
commands. To execute a command, select it from the drop-down list, and
click
Write Changes .
Figure D–1. Drop-down list for the DPRO_CMD parameter
Descriptions of the commands are provided in the following table.
Thermo Fisher Scientific DensityPRO with F
OUNDATION
™ Fieldbus Application Guide D-1