Thermo Scientific AquaSensors AV38 User Manual Download | Manualshive

Page: 85 / 88

background image

Thermo Scientific AquaSensors

™

DataStick

™

Ethernet Communications User Guide

83

10 Limited Warranty

WARRANTY/REPLACEMENT PLAN

Thermo Fisher Scientific warrants its Smart Communications Adapters against material and
workmanship defect for a period of one year from the date of shipment.

In the event that a defect is discovered during the warranty period, Thermo Fisher Scientific agrees, at

its option, to repair or replace the defective product. Any product repaired or replaced under this
warranty will be warranted only for the remainder of the original product warranty period.

This warranty does not apply to consumable products associated with this product including, but not

limited to, chemical reagents and salt bridges.

Products may not be returned without authorization from Thermo Fisher Scientific. To obtain
authorization, please call Thermo Fisher Scientific for a return material authorization number.

Limitations:

This warranty does not cover:

1.

Damage caused by misuse, neglect (lack of appropriate maintenance), alteration, accident or

improper application or installation.

2.

Damage caused by any repair or attempted repair not authorized by Thermo Fisher Scientific.

3.

Any product not used in accordance with the instructions furnished by Thermo Fisher
Scientific.

4.

Damage caused by acts of God, natural disaster, acts of war (declared or undeclared), acts of
terrorism, work actions, or acts of any governmental jurisdiction.

5.

Freight charges to return merchandise to Thermo Fisher Scientific.

6.

Travel fees associated with on-site warranty repair.

This warranty is the sole expressed warranty made by Thermo Fisher Scientific in connection with its

products. All other warranties, whether expressed or implied, including without limitation, the
warranties of merchantability and fitness for a particular purpose, are expressly disclaimed.

The liability of Thermo Fisher Scientific shall be limited to the cost of the item giving rise to the claim.

In no event shall Thermo Fisher Scientific be liable for incidental or consequential damages.

This warranty is the sole and complete warranty for Thermo Fisher Scientific. No person is authorized
to make any warranties or representations on behalf of Thermo Fisher Scientific.

Thermo Fisher Scientific reserves the right to change or modify this warranty at any time.

«
...
83
84
85
86
87
...
»

Summary of Contents for AquaSensors AV38

























































































Reviews:

No comments

Related manuals for AquaSensors AV38

Mentor Visual iQ

Brand: GE Pages: 2

Brand: OHAUS Pages: 52

CellaCast PA8 Series

Brand: Keller Pages: 12

Brand: RHS Pages: 8

Brand: Apogee Pages: 22

Brand: Aethra Pages: 2

Brand: Flymaster Pages: 7

Brand: Bahco Pages: 21

Brand: Kübler Pages: 72

Brand: Omega Pages: 26

Brand: Laser Technology Pages: 80

Brand: LaserLiner Pages: 84

Brand: Kawai Pages: 2

Brand: Hanna Instruments Pages: 11

Brand: Fluke Pages: 8

BioTector B3500C

Brand: Hach Pages: 165

Brand: BART Pages: 24

Micropilot S FMR 53 Series

Brand: E+H Pages: 12

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands