Thermo Scientific Applied Biosystems SeqStudio Genetic Analyzer User Manual Download

Page: 78 / 242

PSM and CSV plate setup files for import into the instrument

Format

Contains...

When to use...

PSM

Create by:
Saving a plate setup

with the SeqStudio

™

Plate Manager desktop

or Connect cloud-based

platform

• Size standard

names and

definitions

• Run module

names and settings

• Dye set

names and settings

• Analysis settings

names and

settings

• All remaining plate setup field

settings: Well ID, Sample name,

Application type and so on.

To create a plate setup that contains all the

properties needed to save and run the plate setup.
Note the following:

• If the size standard, analysis settings, or run

module in the PSM file do not exist on the

instrument, they are automatically created

when the PSM file is imported.

• If the Plate setup security is set to Hidden:

– The plate setup is available for selection

on the instrument only to the user who

created the PSM file.

CSV

Create by:

• Saving as CSV in

the SeqStudio

™

Plate Manager

desktop or Connect

cloud-based

platform

• Downloading a

template from the

SeqStudio

™

Plate

Manager desktop

or Connect cloud-

based platform

• Size standard

names only

• Dye set

name only

• Run module

names only

• All remaining plate setup field

settings: Well ID, Sample name,

Application type and so on.

To update properties of the plate setup (such as

sample name)

after the size standard, dye set, and

run module for the plate setup have been created

or imported on the instrument.
When you import a CSV file:

• If the size standard, dye set, or run module in

the CSV file

do not exist on the instrument:

– An error message is displayed.
– The CSV file is not imported on the

instrument.

• If the size standard or run module in the CSV

file

do exist on the instrument:

– The CSV file is imported on the

instrument.

– The settings from the size standard, dye

set, and run module that exist on the

instrument are used (because the CSV

file contains the names of these

elements, but not the settings).

– The Plate setup security is set to Hidden.

Chapter 6

Create or modify a plate setup from the instrument

PSM and CSV plate setup files for import into the instrument

SeqStudio

™

Genetic Analyzer Instrument and Software User Guide

Summary of Contents for Applied Biosystems SeqStudio Genetic Analyzer



















































































































































































































































Search results

Summary of Contents for Applied Biosystems SeqStudio Genetic Analyzer

Reviews:

Related manuals for Applied Biosystems SeqStudio Genetic Analyzer

Brands by name

Popular brands

Thermo Scientific Applied Biosystems SeqStudio Genetic Analyzer, User Manual

Search results

Summary of Contents for Applied Biosystems SeqStudio Genetic Analyzer

Reviews:

Related manuals for Applied Biosystems SeqStudio Genetic Analyzer

Brands by name

Popular brands