Thermo Scientific Applied Biosystems SeqStudio Genetic Analyzer User Manual Download

Page: 230 / 242

Safety information for instruments not manufactured by Thermo

Fisher Scientific

Some of the accessories provided as part of the instrument system are not designed or

built by Thermo Fisher Scientific. Consult the manufacturer's documentation for the

information needed for the safe use of these products.

Instrument safety

CAUTION!

Do not remove instrument protective covers. If you remove the

protective instrument panels or disable interlock devices, you may be exposed

to serious hazards including, but not limited to, severe electrical shock, laser

exposure, crushing, or chemical exposure.

CAUTION!

Moving Parts. Moving parts can crush, pinch and cut. Keep hands

clear of moving parts while operating the instrument. Disconnect power before

servicing.

WARNING!

Ensure appropriate electrical supply. For safe operation of the

instrument:

Plug the system into a properly grounded receptacle with adequate current

capacity.

Ensure the electrical supply is of suitable voltage.

Never operate the instrument with the ground disconnected. Grounding

continuity is required for safe operation of the instrument.

WARNING!

Power Supply Line Cords. Use properly configured and approved

line cords for the power supply in your facility.

WARNING!

Disconnecting Power. To fully disconnect power either detach or

unplug the power cord, positioning the instrument such that the power cord is

accessible.

General

Physical injury

Electrical safety

Appendix H

Safety

Safety information for instruments not manufactured by Thermo Fisher Scientific

230

SeqStudio

™

Genetic Analyzer Instrument and Software User Guide

Summary of Contents for Applied Biosystems SeqStudio Genetic Analyzer



















































































































































































































































Search results

Summary of Contents for Applied Biosystems SeqStudio Genetic Analyzer

Reviews:

Related manuals for Applied Biosystems SeqStudio Genetic Analyzer

Brands by name

Popular brands

Thermo Scientific Applied Biosystems SeqStudio Genetic Analyzer, User Manual

Search results

Summary of Contents for Applied Biosystems SeqStudio Genetic Analyzer

Reviews:

Related manuals for Applied Biosystems SeqStudio Genetic Analyzer

Brands by name

Popular brands