Thermo Scientific Accela Pump, Hardware Manual

Page: 19 / 50

1
Introduction
Status LEDs
Thermo Scientific Accela RI Detector Hardware Manual 7
Status LEDs
The Accela RI Detector has four status light-emitting diodes (LEDs) located on the left door
of the detector as shown in
Figure 8 and described in Table 1 .
Figure 8. Status LEDs
Specifications
Table 2 lists the specifications for the Accela RI Detector.
Table 1. Status LEDs and meanings
LED State Meaning
Power Green The detector is on and receiving power.
Comm Green Communication to the data system PC has been
established.
Amber There is no communication with the data system.
Run Green The detector is ready for a run.
Flashing green A run is in progress and the detector is sending data
to the data system computer.
Amber The detector is not ready to start a run.
Flashing amber An error occurred during the run.
Temp Green The detector has reached a stable temperature.
Amber The temperature of the detector has not equilibrated.
Power Comm Run Temp
Table 2. Accela RI Detector specifications (Sheet 1 of 2)
Item Specification
Dimensions 18 cm (7.08 in.)
×
36 cm (14.17 in.)
×
47 cm (18.5 in.)
( h
×
w
×
d )
Weight 17.3 kg (38 lbs)
Power requirements 100/115 or 230 V ac ± 10%, 50/60 Hz, 100 VA max
Operating temperature +10 to +40 °C
Storage temperature –40 to +70 °C