Thermo Scientific A2-OK Operating And Maintenance Manual Download Page 31

Page: 31 / 32

9-2

Horizontal System

Thermo Scientific

Section 9

Warranty Information

THERMO

FISHER SCIENTIFIC OWL

PRODUCTS W

ARRANTY

INTERNA

TIONAL

The W

arranty Period st

art

s two months from the date your equipment is shipped from our facility

This allows shipping

time so the warranty will go into ef

fect at approximately the same time your equipment is delivered.

The warranty protec-

tion extends to any subsequent owner

During the first thirty six (36) months, component p

art

s proven to be non-conforming in material or workmanship will be

replaced at

Thermo’

s expense, excepting labor

. Inst

allation, calibration and certification is not covered by this warranty

agreement.

The

echnical Services Dep

artment must be cont

acted for warranty determination and direction prior to per-

formance of any rep

airs. Expendable items, glass, filters and gasket

s are excluded from this warranty

Replacement or rep

air of component p

art

s or equipment under this warranty shall not extend the warranty to either the

equipment or to the component p

art beyond the original warranty period.

The

echnical Services Dep

artment must give

prior approval for return of any component or equipment.

Thermo’

s option, all non-conforming p

art

s must be returned

Thermo post

age p

aid and replacement p

art

s are shipped FOB destination.

THIS W

ARRANTY

IS EXCLUSIVE

AND IN LIEU OF

ALL

OTHER W

ARRANTIES, WHETHER WRITTEN, ORAL, OR

IMPLIED. NO W

ARRANTIES OF MERCHANT

ABILITY

OR FITNESS FOR

TICULAR PURPOSE SHALL

APPL

Thermo shall not be liable for any indirect or consequential damages including, without limit

ation, damages to lost profit

or loss of product

our local

Thermo Sales Of

fice is ready to help with comprehensive site prep

aration information before your equipment

arrives. Printed instruction manuals carefully det

ail equipment inst

allation, operation and preventive maintenance.

If equipment service is required, please call your

echnical Services Dep

artment at 1-800-438-4851 (USA

or Canada) or

1-740-373-4763. W

e’re ready to answer your questions on equipment warranty

, operation, maintenance, service, and

special applications. Out

side the USA, contract your local distributor for warranty information.

ISO 9001

REGISTERED

Rev

. 0 9/12

Summary of Contents for A2-OK

































Search results

Summary of Contents for A2-OK

Reviews:

Related manuals for A2-OK

Brands by name

Popular brands

Thermo Scientific A2-OK, Operating And Maintenance Manual

Search results

Summary of Contents for A2-OK

Reviews:

Related manuals for A2-OK

Brands by name

Popular brands