Thermo Scientific 5028i, Instruction Manual

Page: 266 / 330

C-Link Protocol Commands
Datalogging
B-26 Model 5028
i
Instruction Manual Thermo Fisher Scientific
Send: lrec 5
Receive: lrec 100 5
08:28 05-04-09 flags 00110000 pm 0.000 baro 0.000 vac
-260.000 pflow -52.000 ambrh 0.000 srh 0.000 ambtemp
-32.000 stemp -41.000 fvol 0.000 cflg 00001F86 aflg
0000FC0C
08:29 05-04-09 flags 00110000 pm 0.000 baro 0.000 vac
-260.000 pflow -52.000 ambrh 0.000 srh 0.000 ambtemp
-32.000 stemp -41.000 fvol 0.000 cflg 00001F86 aflg
0000FC0C
08:30 05-04-09 flags 00110000 pm 0.000 baro 0.000 vac
-260.000 pflow -52.000 ambrh 0.000 srh 0.000 ambtemp
-32.000 stemp -41.000 fvol 0.000 cflg 00001F86 aflg
0000FC0C
08:31 05-04-09 flags 00110000 pm 0.000 baro 0.000 vac
-260.000 pflow -52.000 ambrh 0.000 srh 0.000 ambtemp
-32.000 stemp -41.000 fvol 0.000 cflg 00001F86 aflg
0000FC0C
08:32 05-04-09 flags 00110000 pm 0.000 baro 0.000 vac
-260.000 pflow -52.000 ambrh 0.000 srh 0.000 ambtemp
-32.000 stemp -41.000 fvol 0.000 cflg 00001F86 aflg
0000FC0C
lrec format
srec format
erec format
These commands report the output format for lrecs and srecs, and erec
data in various formats such as ASCII without text, ASCII with text,
or binary. The following example shows the output format for lrecs is
ASCII with text, according to Table B–3 .
Send: lrec format
Receive: lrec format 1
set lrec format format
set srec format format
set erec format
format
These commands set the output format for lrecs and srecs, and erec
data, according to Table B–3 . The following example sets the lrec output
format to ASCII with text.
Send: set lrec format 1
Receive: set lrec format 1 ok
Table B–3.
Record Output Formats
Format
Output Format
0 ASCII no text
1 ASCII with text
2 Binary data