background image

Technical specifications

The following table displays the system specifications for an instrument using the ProFlex

 96-Well Sample Block, ProFlex

 3x 32-Well

Sample Block, ProFlex

 2x 96-Well Sample Block, ProFlex

 2x Flat Sample Block, ProFlex

 2x 384-Well Sample Block

Table 1    ProFlex

Thermal Cycler technical specifications: ProFlex

 96-Well Sample Block, ProFlex

 3x32-Well Sample Block,

ProFlex

 2x 96-Well Sample Block, ProFlex

 2x Flat Sample Block, ProFlex

 2x 384-Well Sample Block

Specification

Block format

3 x 32-well, 0.2 mL

(Cat. No. 4483638)

96-well, 0.2 mL

(Cat. No. 4483637)

2 x 96-

well, 0.2 mL

(Cat. No. 4484071)

2 x Flat block

(Cat. No. 4484074)

2 x 384-well, 0.2 mL

(Cat. No. 4484072)

Maximum block ramp rate

6.0°C/sec

3.0°C/sec

1.6°C/sec

3.0°C/sec

Maximum sample ramp rate

4.4°C/sec

1.6°C/sec

N/A

1.6°C/sec

Temperature accuracy

±0.25°C (35°C to 99.9°C)

Temperature range

0°C to 100.0°C

Temperature uniformity

<0.5°C (20 seconds after reaching 95°C)

Dimensions

• Height: 27.2 cm (10.7 in)
• Width: 33.0 cm (13 in)
• Depth: 56.5 cm (22 in)

Weight

18.8 kg (41 lb)

20.4 kg (45 lb)

PCR volume range

10–80 µL

10–100 µL

33 nL

5–20 µL

Instrument memory

USB, onboard

Display interface

8.4-inch color TFT LCD

Power

100–240 V, 50–60 Hz Max: 950 VA

Note: 

For Australia (AU) / New Zealand (NZ) only:

 230 VAC, 50 Hz, Max: 950 W, Max Current: 10 A

VeriFlex

 blocks

independent control

2 temperature zones

per block
(5°C zone-to-zone)

6 temperature zones
25°C (5°C zone-to-

zone),

N/A

Ambient humidity

15% - 80% Relative Humidity, non-condensing (acceptable range)

Ambient operating

temperature

15°C to 30°C (acceptable range)

Table 2   

Port

Description

AC power cable port

10/100 Fast Ethernet port for connecting to a network

USB v1.0 port for connecting to an external network drive, jump drive, or other USB storage device

RS232 serial communication port for connecting the probe for the Temperature Verification Kit

USB v1.0 port for connecting to USB-enabled Wi-Fi Card

ProFlex

 PCR System Installation and Operation Quick Reference 

7

Summary of Contents for 4483636










Reviews: