Stroke Length Adjustment (continued)
2. To alter the stroke length, unscrew the bearing mounting screw from its
present position and rethread the screw firmly into the hole that will provide
the desired stroke length. The hole closest to the hub center provides the
shortest stroke; the one furthest away, the longest. The three threaded
openings provide stroke lengths of 0.5", 1.0", and 1.5".
3. After selecting desired stroke length, close control panel and replace the four
screws. Reconnect the bath to power source.
Reciprocal Shaking Water Baths
5-3
Thermo Scientific
Installation
Section 5
