Thermo Scientific 074114, Operator'S Manual

Page: 26 / 148

Dionex PDA Operator’s Manual
18
Doc. 065378-01 1/12
Semi-Micro Flow Cell
The semi-micro flow cell assembly (see Figure 2-6 ) is available in PEEK
and 316 stainless steel. Two built-in heat exchangers—one on the cell
inlet tubing and one on the cell handle—help stabilize the temperature of
the mobile phase before it enters the cell.
The semi-micro flow cell is designed for applications with 2- to 3-mm ID
separator columns and flow rates up to 1.0 mL/min.
Figure 2-6. Semi-Micro Flow Cell Assembly
Semi-Micro Cell Component PEEK Cell SST Cell
Inlet tubing: 0.12-mm (0.005-in) ID P/N 063897 N/A
Outlet tubing: 0.38-mm (0.015-in) ID P/N 057304 N/A
Inlet tubing: 0.12-mm (0.005-in) ID N/A P/N 063903
Outlet tubing: 0.25-mm (0.010-in) ID N/A P/N 051650
Reducing union fitting P/N 055903 P/N 055902
Reducing Union Fitting
Reducing Union Fitting
Cell Outlet Tubing
Cell Inlet Tubing
Heat Exchangers
Flow Cell
Handle
Spring Clip