BC
A02
3
*(1(5$/
&RQWUDVWDGMXVWPHQWGLVSOD\
Press (8) and use the arrows (1, 2) to adjust the contrast.
6HWWLPHDQGGDWH
Press (16) once, the display will show “SET TIME”.
Set minutes: Press (16) again and use the arrows.
Set hours: Press (16) for the third time and use the arrows.
Set date: Press (16) for the fourth time and use the arrows.
35(+($7(5
6HWWLQJWKHWLPHDQGGDWHIRUVWDUWLQJWKHSUHKHDWHU
Press (15) once, the display will show “PRE HEATER ON”
Set minutes: Press (16) again and use the arrows.
Set hours: Press (16) for the third time and use the arrows.
Set date: Press (16) for the fourth time and use the arrows.
Press (15) again, the display will show “PRE HEATER OFF”
)5217+($7(523(5$7,21
$LUWHPSHUDWXUH
Press (4) and use the arrows (1, 2) to set
the percentage of your choice.
%ORZHUVSHHG
Press (3) and use the arrows to set the
blower speed.
5HFLUFXODWLRQDLU
Press (12), the display will show “FR
RECIRC ON”. Press (12) again, the display will show “FR
RECIRC OFF”.
'HIURVWIURQWZLQGRZ
Press (5), the display will show
“xx DEFROST ON”. Press (5) again, the display will show
“xx DEFROST OFF.
$LUGLVWULEXWLRQGULYHUFRXULHUIHHW
Press (6) and use the
arrows to distribute the hot or cold air according to your
choice.
$&$LUFR
Press (10), the display will show “FR AIRCO
ON”. Press (10) again, the display will show “FR AIRCO
OFF”.
,17(5,2523(5$7,21
Press (7) to
FKDQJHFOLPDWHLQWKHLQWHULRU
. The display will
show “PASSANGER”. The LED goes on and you now have 5
sec. to activate one of the function keys listed below.
After 5 sec. of inaction the selector key will switch back to the
driver position.
9HQWLODWLRQ
Press (7) and then (3) within 5 sec. and then
use the arrows (1, 2) to regulate air quantity. The display will
show “P. BLOWER 100%”.
5HFLUFXODWLRQDLU
Press (7) and then (12) within 5 sec. The
display will show “P. RECIRC ON”.
7HPSHUDWXUH
Press (7) and then (4) within 5 sec. and use
the arrows to set interior temperature (17–26 °C). The
display will show “SET TEMP
WW
°C” (tt = temperature).
+HDWLQJ
Press (7) and then (9) within 5 sec. If the LED
is on, the heating is on. After 5 sec. “HEATING MODE”
appears in the display.
$&$LUFR
Press (7) and then (10) within 5 sec. If the LED
is on, the A/C is on. After 5 sec. “AIRCO MODE” appears
in the display.
$XWRPDWLFRSHUDWLRQ
Press (11), the interior temperature
will automatically be kept at the set value of your choice.
The display will show “AUTO ON”.
Press (11) for 5 sec., the control system will be
WXUQHGRII
.
If you press (11) again, the control system will be
UHDFWLYDWHG
.
',63/$<
,QWHULRUWHPSHUDWXUH
Press (13) to display the current
interior temperature.
([WHULRUWHPSHUDWXUH
Press (14) to display the current
exterior temperature.
If the exterior temperature is lower than +3 °C, the red LED
starts burning as a warning about possibility of icy road.
.H\V,QGH[
(1) Higher value
(9) Heating
(2) Lower value
(10) A/C (Airco)
(3) Blower speed
(11) Automatic operation
(4) Temperature
(12) Recirculation
(5) Defrost front window
(13) Interior temperature
(6) Air distribution
(14) Exterior temperature
(7) Selector (interior)
(15) Pre-heater
(8) Contrast adjustment
(16) Time
&RQWURO 3DQHO 'HVFULSWLRQV
DQG 2SHUDWLQJ ,QVWUXFWLRQV
