40
TK 56612-18-IM-EN
Installation Check List
☐
All components are installed with recommended hardware and tightened securely.
☐
All mounting holes and access holes are sealed with neutral/alcohol cure silicone sealant.
☐
All covers, guards or screens are installed securely on unit.
☐
Evaporator drain hoses are installed and angled downward for proper drainage.
☐
Drain hose heaters (if applicable) are installed correctly.
☐
Orifice screen is installed in the expansion valve at the evaporator.
☐
In-cab controller is installed and is accessible and visible from the driver’s position.
☐
Refrigerant hoses are not taut - they are able to absorb vibrations.
☐
Refrigerant hoses are not making contact with moving, sharp or hot components.
☐
Suction Line P-Trap installed correctly.
☐
Compressor is filled with the proper amount and type of oil.
☐
All electrical connectors are locked securely in place.
☐
Standby Power Receptacle (if applicable) is mounted securely to vehicle.
☐
All electrical harnesses and wiring is routed and secured adequately.
☐
Correct size and amperages fuse is installed in the main power harness to the battery.
☐
All battery connections are clean and tight.
☐
Vehicle compressor drive kit test was carried out.
☐
Compressor ground strap is installed correctly.
☐
SPR or CPR Valves (if applicable) were adjusted for maximum performance.
☐
Complete refrigeration system was checked for leaks.
☐
Unit is charged with correct type and amount of refrigerant.
☐
Unit operates correctly.
Summary of Contents for V-520 RT Series
Page 32: ...32 TK 56612 18 IM EN E El le ec ct tr ri ic ca al l C Co on nn ne ec ct ti io on ns s ...
Page 42: ...42 TK 56612 18 IM EN Component Dimensions and Weights Figure 1 ES500 EVAPORATORS ...
Page 54: ...54 TK 56612 18 IM EN N No ot te es s ...