![background image](http://html1.mh-extra.com/html/thermo-king/t-1000r/t-1000r_maintenance-manual_1104339085.webp)
Operating Instructions Premium HMI
6-13
SELECTING CYCLE-SENTRY OR CONTINUOUS MODE
With Thermo King Truck unit applications, CYCLE-SENTRY Mode or Continuous Mode operation is selected from the Main
Menu - Mode Submenu. See the Main Menu - Mode Submenu material later in this section for complete details.
USING THE GAUGES KEY
The GAUGES key allows the operator to view the unit gauges. To access the GAUGES menu press the GAUGES key.
Gauges Key
The first gauge display will appear. Press the NEXT and BACK keys to scroll thru the gauges as desired. The Battery Voltage
Gauge is shown in Figure . Press the LOCK key to lock the selected gauge on the display.
Next, Back, Lock Keys
The gauges available are shown in the following list. The order in which the gauges appear may vary slightly based on
software revision. Not all gauges may appear, depending on unit configuration and software revision
To return to the Premium Display press the EXIT key.
Gauges Available
NOTE: Not all gauges or I/O states will appear, dependent upon unit type and configuration
Coolant Temperature - Displays the temperature of the engine coolant.
Coolant Level - Displays the coolant level in the overflow tank as OK or LOW.
Oil Pressure - Displays the engine oil pressure as OK or LOW.
Oil Level - Displays the engine oil level as OK or LOW.
Amps - Displays the current flow in amps to or from the unit battery
.
Battery Voltage - Displays the voltage of the unit battery.
Engine RPM - Displays the engine speed in RPMs.
Discharge Pressure - Displays the unit discharge pressure. (ETV units only)
Suction Pressure - Displays the unit suction pressure. (ETV units only)
ETV Position - Displays the current position of the Electronic Throttling Valve (ETV). (ETV units only)
Compressor Temperature - Displays the temperature sensed by the compressor temperature sensor.
Summary of Contents for T-1000R
