![background image](http://html1.mh-extra.com/html/thermo-king/sr-2-smartreefer2/sr-2-smartreefer2_diagnostic-manual_1104380062.webp)
Section 3 – SR-2 Software Description
GUARDED ACCESS MENU
FEATURES
The Guarded Access Menu allows unit operation to
be configured to user requirements. OptiSet
features can also be programmed using the OptiSet
Setup Guide.
Security Code Protection
A security code can be set to restrict access to the
Guarded Access Menu. If a security code is set the
technician will be prompted to enter the correct code
when accessing the Guarded Access Menu. The
security code is defaulted to off.
Accessing the Guarded Access Menu
From the Standard Display press the MENU key.
The controller will display the Main Menu. From the
first Main Menu display (either Language or Alarms)
press and hold both the EXIT key and the key with
no label above it for 5 seconds.
After 5 seconds the controller will display the
Maintenance Menu. Press the NEXT key until the
Set Time and Date Menu appears. From the Set
Time and Date Menu press and hold both the EXIT
key and the key with no label above it for 5 seconds.
After 5 seconds the controller may display a Security
Code challenge. If a Security Code has been set
the operator is prompted to enter the correct code
using the “+” and “-“ keys. When the correct code is
set press the YES key to enter the Guarded Access
Menu. If the correct Security Code is not entered
access to the Guarded Access Menu will be denied.
If no Security Code has been set the controller will
directly enter the Guarded Access Menu.
Bypassing the Security Code
If a Security Code is set and the Guarded Access
Menu must be accessed, the Security Code can be
bypassed by entering “4444”.
Leaving the Guarded Access Menu
When leaving the Guarded Access Menu the
microprocessor will automatically shut the unit down
and restart in order to configure the changes that
may have been made.
3-12
31 January 2005
Summary of Contents for SR-2 SmartReefer2
