![background image](http://html1.mh-extra.com/html/thermo-king/sr-2-smartreefer2/sr-2-smartreefer2_diagnostic-manual_1104380102.webp)
Section 4 – SR-2 Operation
Display
MENU
35
°F
35
CYCLE SENTRY
SET
SENSORS
GAUGES
POINT
.8
The display presents information to the operator. This
information includes setpoint and temperature, unit operating
information, gauge readings, temperatures and other
information as selected by the operator. The Standard Display
of box temperature and setpoint is shown here. The unit is
running in CYCLE SENTRY Mode, has a setpoint of 35°F, and
an actual box temperature of 35.8°F. The down-pointing arrow
shows the unit is cooling. Pressing the left soft key accesses
the SETPOINT and pressing the right soft key accesses the
MAIN MENU. The other two soft keys access the GAUGES
and SENSORS menus.
Keys
Hard Keys
The keys on either side of the display are dedicated or “hard” keys. Their function always remains the same.
They are described below.
ON
This key is used to turn the unit on. The Thermo King Logo screen appears briefly and the
display shows the Standard Display of box temperature and setpoint. For more information see
“Turning the Unit On and Off” later in this section.
OFF
This key is used to turn the unit off. The unit enters the power-down sequence when this key is
pressed. For more information see “Turning the Unit On and Off” later in this section.
This key is used to initiate a manual defrost cycle. For more information see “Initiating a Manual
Defrost Cycle” later in this section.
This key is used to select Cycle Sentry Mode or Continuous Mode operation if allowed by
OptiSet. For more information see “Selecting Cycle Sentry or Continuous Mode” later in this
section.
4-4
31 January 2005
Summary of Contents for SR-2 SmartReefer2
