Operating Instructions
116
Figure 144: Menu Key
From the Main Menu choose Diesel Mode and press the
SELECT Soft Key (Figure 145).
Figure 145: Select Key
The new mode is confirmed for 10 seconds. The unit will start
and run in Diesel Mode.
Any electric standby related Shutdown Alarms become Log
Alarms when the unit is switched to Diesel Mode operation. If
the unit is switched back to Electric Mode these alarms again
become Shutdown Alarms.
Adjust Brightness
The brightness of the HMI Control Panel display can be
adjusted to allow for changing ambient light conditions. The
choices available to the operator are HIGH, MEDIUM, LOW
and OFF. OFF actually results in a very dim screen suitable for
low light conditions.
Display brightness is adjusted using the Adjust Brightness
Menu. From the Standard Display, press the MENU Key
(Figure 146).
MENU
35
°F
35
SET
SENSORS
GAUGES
POINT
.8
ON
OFF
ON
OFF
MAIN MENU
DOWN
EXIT
SELECT
UP
HOURMETERS
MODE
DIESEL MODE
ADJUST BRIGHTNESS
