Operating Instructions
Turn the system ON by pressing key ON/OFF (1).
Use the keys MODE (2), DOWN and UP (3), SPEED (4) and AIR
MODE (5) to adjust the system. By pressing the selection key you
select one of the options in the same group.
In Auto Mode all functions are controlled by the ClimaAIRE I D
controller automatically according to the required setpoint.
Turn the system OFF by pressing key ON/OFF (1).
Control Panel Descriptions
ON/OFF
(1)
MODE
(2)
DOWN and UP
(3)
SPEED
(4)
AIR MODE
(5)
BEA133
(1) ON/OFF KEY
To turn the unit ON, press the key. The display will show the
setpoint temperature.
To turn the unit OFF, press the key again.
(2) MODE SELECTION KEY
Reheat / Auto Mode: The unit will cool or heat the bus
automatically (according to thermostat requirements).
A/C Mode: The unit will operate in cool mode.
Heat Mode: The unit will operate in heat mode.
Ventilation Mode: Only the blowers are operating.
(3) DOWN AND UP KEYS
The down key will decrease temperature setpoint. The up key
will increase temperature setpoint. The down and up keys are
also used to scroll through the menu selection.
(4) BLOWER SPEED SELECTION KEY
Automatic Blower Speed: The blowers are controlled
automatically depending on the thermostat setpoint and
passenger compartment conditions.
High Blower Speed.
Medium Blower Speed.
Low Blower Speed.
(5) FRESH OR RECIRCULATED AIR SELECTION KEY
Automatic: Fresh air is automatically controlled in passenger
compartment.
Fresh Air damper is open.
Fresh Air damper is open at 50%.
Recirculated Air: Fresh air damper is closed.
DISPLAY
Display shows the setpoint temperature.
“Bus” - return air temperature symbol.
“S” - setpoint temperature symbol.
Blue symbol - clutch is switched on.
Red symbol - boost pump is switched on.
