Operating Instructions
Turn the system ON by pressing key ON/OFF (1).
Use the keys MODE (2), SPEED (3) and AIR MODE (4) to adjust
the system. By pressing the selection key you select one of the
options in the same group.
In Auto Mode all functions are controlled by the ClimaAIRE
controller automatically according to the required setpoint.
Turn the system OFF by pressing key ON/OFF (1).
Control Panel Descriptions
ON/OFF
(1)
MODE
(2)
SPEED
(3)
AIR MODE
(4)
THERMOSTAT
(5)
AJA831
(1) ON/OFF KEY
To turn the unit ON, press the key.
To turn the unit OFF, press the key again.
(2) COOL / HEAT MODE SELECTION KEY
Reheat / Auto Mode: The unit will cool or heat the bus
automatically (according to thermostat requirements).
A/C Mode: The unit will operate in cool mode.
Heat Mode: The unit will operate in heat mode.
Ventilation Mode: Only the blowers are operating.
(3) BLOWER SPEED SELECTION KEY
Automatic Blower Speed: The blowers are controlled
automatically depending on the thermostat setpoint and
passenger compartment conditions.
High Blower Speed.
Medium Blower Speed.
Low Blower Speed.
(4) FRESH OR RECIRCULATED AIR SELECTION KEY
Automatic: Fresh air is automatically controlled in
passenger compartment.
Fresh Air damper is open.
Recirculated Air: Fresh air damper is closed.
(5) THERMOSTAT
To cool the passenger compartment, turn the knob to the
LEFT. To warm the passenger compartment, turn the knob to
the RIGHT.
The inside temperature range is 17 - 27 C (63 - 80 F).
