![background image](http://html1.mh-extra.com/html/thermo-king/098916/098916_maintenance-manual_1104333051.webp)
Operating Instructions
50
Setpoint Menu
Pressing the
S
ETPOINT
key displays the following
list of tasks and values that can be activated or set:
•
Opti-Set (AFAM+ only)
•
Setpoint Temperature
•
Water-Cooled Condenser
•
Bulb Mode
•
Evaporator Fan Speed
•
Defrost Termination Temperature
•
Economy Mode
•
Humidity Control
•
Humidity Setpoint
•
AFAM (AFAM+ only)
•
AFAM Delay (AFAM+ only)
•
AFAM Rate (AFAM+ only)
•
CO
2
Maximum (AFAM+ only)
NOTE: The screens that display on the
controller are determined by the controller
software setting and the options installed on the
unit. All screens are not present on all units.
A complete listing of the controller operating
menu is located on an 11” x 17” fold out on the
last page in this manual.
Figure 28: Setpoint Menu
Setpoint Menu
- Opti-Set
- Temp. Setp.
- Water-Cooled Condenser
- Bulb Mode
- Evap Fan Spd
- Defrost Trm.
- Economy Mode
- Hum. Control
- Hum. Setp.
- AFAM
- AFAM Delay
- AFAM Rate
- C02 Max.
NOTE: All screens are NOT
present on all units. The
screens that display on the
controller are determined by
the Controller Software
settings and the options
installed on the unit.
Summary of Contents for 098916
