zero
test
AQUAfast turbidity Or
ion AQ2010
mode
power
1. Turn colorimeter on with the
power
key. Press
mode
key to choose method for multimeters.
2. Fill clean dry cuvette to mark with sample and cap.
3. Place cuvette in colorimeter and press
zero•test
key.
4. Remove cuvette, remove cap, and add tablet or
reagent. Crush and stir with stir rod. Recap
the cuvette.
5. Allow sample to react for any required wait time.*
6. If additional tablet or reagent is required, add,
crush, and stir with stir rod. Allow sample to react
for any required wait time.
7. Wipe any moisture or fingerprints off of cuvette
and place in colorimeter.
8. Press
zero•test
key.
9. Record reading from display.
See individual instructions for detailed sample and
standard preparation.
* NOTE: Some two reagent samples require a
reading be taken at this point, then proceed to
step 7. Perform reading then add additional
reagent in step 6.
Quick Start Card
Analyze • Detect • Measure • Control™
Orion AQUAfast
®
II
