26
ENGLISH
MENU selection
Access the “menu” mode by pressing the key “ENTER/RESET” The digits of the small display indicate “0000”, which is the first
accessible menu.
5
3
4
2
1
In this mode, keys have the following functions:
Nr.
Button
Function
1
"+"
Exits from the menu and cancels a parameter change
2
"-"
Exits from the menu and cancels a parameter change
3
"
▲
"
Selects the following menu or increases a certain parameter value
4
"
▼
"
Selects the previous menu or decreases a certain parameter value
5
"ENTER/RESET"
Enters into the selected menu/parameter or confirms the parameter change
Enter password
To access INSTALLER parameters, it is necessary to enter the
password:
- Press the key “ENTER/RESET” and select “Code” by
using the keys "
▲
" and "
▼
".
- Press the key “ENTER/RESET“ to confirm
- Press the keys "
▲
" and "
▼
" to increase or decrease the
value of the blinking digit
- Once the required value is obtained, press the key “EN-
TER/RESET” to confirm the entered value
After entering the INSTALLER password the relevant menus
and parameters will also be displayed.
The system provides for three types of access:
USER: new password
INSTALLER: password 18
b
After entering the password, the display will show the
symbol
which will be displayed until the displaying
and/or parametrisation proceed. After some minutes of
inactivity of the display, it must be entered again.
