THERMEx YL-IF7008SFZ-KE9 Manual Download

Page: 2 / 40

Safety Warnings

Your safety is important to us. Please read this

information before using your cooktop.

Installation

Electrical Shock Hazard

• Disconnect the appliance from the mains

electricity supply before carrying out any work

or maintenance on it.

• Connection to a good earth wiring system is

essential and mandatory.

• Alterations to the domestic wiring system must

only be made by a qualified electrician.

• Failure to follow this advice may result in

electrical shock or death.

Cut Hazard

• Take care - panel edges are sharp.

• Failure to use caution could result in injury or

cuts.

Important safety instructions

• Read these instructions carefully before

installing or using this appliance.

• No combustible material or products should be

placed on this appliance at any time.

• Please make this information available to the

person responsible for installing the appliance

as it could reduce your installation costs.

• In order to avoid a hazard, this appliance must

be installed according to these instructions for

Summary of Contents for YL-IF7008SFZ-KE9









































Search results

Summary of Contents for YL-IF7008SFZ-KE9

Reviews:

Related manuals for YL-IF7008SFZ-KE9

Brands by name

Popular brands

THERMEx YL-IF7008SFZ-KE9, Manual

Search results

Summary of Contents for YL-IF7008SFZ-KE9

Reviews:

Related manuals for YL-IF7008SFZ-KE9

Brands by name

Popular brands