THERMEx Rigel PM 24, Installation And User Manual

Page: 8 / 20

5
8. MAINTENANCE OF THE BOILER
In order to use your appliance trouble-free and efficiently for long years we recommend scheduling
annual maintenance, preferably at early winter season, by Thermex authorised service.
Do not clean external surfaces of your appliance with detergent or chemical materials.
Check your installa on before making connec ons to the boiler and ensure that the installa on pipes
are free from dirt or any par cles.
Boiler, support Styrofoam, installa on hanging
equipment, user’s manual, warranty cer ficate and
service booklet.
The loca ons where the boiler can be installed should be
selected by observing the relevant regula ons and
requirements set forth by standard codes of prac ce in
force as well as local gas company standards. Installa on
hanging equipment should be fixed on the wall in such
way to carry the weight of the boiler. The hanging
bracket should be fixed level, Figure 4.
The life me of wall hung combina on boilers set by the Ministry of Science, Industry and Trade is 15
years. According to the relevant codes the manufacturing companies undertake to maintain and
provide required spare parts of the appliance during the set life me.
9. INSTALLATION INSTRUCTIONS
Boiler package contains:
A suitable filter must be installed to the water inlet to the
boiler, Figure 5.
Check that the maximum water mains pressure does not
exceed 8 bars; if it does, a pressure reducing valve must
be installed
Condensate drain should be laid with con nuous °
downward slope and to be connected to waste water
drain. The drain hose should be insulated against
freezing.
Make sure that the gas category for which the boiler was designed corresponds to the category
available in the loca on
where it will be used and the supplied gas pressure, as well as the gas installa on, is in conformity with
data plate.
Figura 4