THERMEX
METZ MEDIO III STRIP
M 423193251229082016
60
NOTE: The fasteners on Thermex ceiling-integrated hoods have a clearance of 2.5 cm.
INSTALLATION IN CEILING PLATFORM
FRAME INSTALLATION
EN
GL
IS
H
»
INS
TALL
ATION
Measure and cut hole for the vent in ceiling.
NOTE: If models with a movable motor are
mounted with the motor on the hood, holes
must be cut out for the motor housing.
Mark the holes from the ceiling platform on
the ceiling.
Drill the holes out.
Screw the ceiling platform to the ceiling.
The hood is mounted into the ceiling platform
by following steps 2-6 in the
section CEILING INSTALLATION.
5
1
x18
2
x18
3
x18
4
Measure out and cut the hole for the hood in
the dropped ceiling.
Measure and install four hooks in the truss.
Hang the frame on the hooks with the
included wires.
2
3
1
Truss
Truss
Dropped ceiling
Frame
Dropped
ceiling
Summary of Contents for METZ MEDIO III STRIP
Page 2: ......
