53
english
usage anD maintenance
UNmONTAgE.OF.SPliT.EXTRACTiON.PlATE
in order to unmontage split extraction plate, pull it down holding
it on right and left top parts.
Photo 15
REPlACiNg.ThE.lAmPS
cut off the connection of the cooker hood with electricity. take off the aluminum cassette filter.
take off the failed lamp and replace it with a new one that is of the same rating. (please wait for
the lamps to cool as they might hurt your hand.)
REPlACiNg.20W.hAlOgEN.lAmPS
take off the glass cover on the lamp with a substance
that will not scratch surface of the product as shown on
the figure. take off the faulty lamp pulling it downwards
and replace it with a new one.
Fig. 3
Note: Do not hold the new lamp with naked hand, sweat or wetness of your hand will cause the
lamp to fail because of the heat that will occur when the lamp is on.
FUNCTiONS.OF.ThE.PRODUCT
Your hood is compatible for use with our without chimney.
USAgE.WiTh.ChimNEy
the product should be connected to a chimney that will direct the air out during usage with chimney.
in order to achieve best performance, pay attention that the duct system follows the shortest way for
connection to the chimney. Your product is produced as it will be appropriate for usage with chimney.
Attention!!! Outlet of the product should not be connected to air canals that have other smoke as
well.
ACTiVE.CARbON.FilTER
to provide air recirculation where product's chimney air outlet
cannot be connected to exterior, it is necessary to use active
carbon filter with your product. You may purchase this accessory
from authorized sellers and after sales services.
Photo 16
15
Figure 3
16
Decor 810_830_24771.indd 53
30/06/10 07.18
