Power on your unit
3
· Remove the white caps from the end
of the white connectors on the tubing
assembly.
· Attach the white connectors to the connector
ports on the front of the unit, by aligning the
tabs and turning clockwise.
Connect a pad
2
DISTILLED WATER RESERVOIR
HANDLE (R AISED)
CONNECTOR PORTS
AC/DC ADAPTER PLUG
Fill the reservoir
with distilled water
1
Easy to Set-Up
Easy to Use
Contents:
(1) ThermaZone Unit
(1) Tubing Assembly
(1) AC/DC Adapter / Power Cord
(1) Instruction Manual
Note: Your choice of pad(s) are packaged
separately and included with the shipment.
This Quick-Start Guide is not a substitute for the
ThermaZone Instruction and Safety Manual. Review the
Instruction and Safety Manual prior to using this unit.
ThermaZone
Unit
AC/DC Adapter
Power Cord
Instruction and
Safety Manual
· Choose the appropriate pad.
· Each pad has hook and loop closures
with elastic straps for a comfortable fit.
· The straps should be snug enough to hold
the pad in place, yet loose enough so that
there is no discomfort.
· Sit back and relax.
Apply your pad
6
Begin thermal therapy
5
· Water poured in the reservoir in Step 1 has
been pumped into the relief pad.
· Slowly pour additional
DISTILLED WATER
into the reservoir while the unit is still on.
· Monitor water fill level over the next minute to
make sure the water level settles between
the “MIN” and “MAX” lines.
Refill the reservoir
4
Power on the unit – on/off
Select timer mode (optional)
Select HEAT or COOL mode
Select comfort level (1-10)
To adjust the temperature during therapy push the + or
– button to increase or decrease temperature.
To check the remaining time on the timer, push the
heat or cool button and remaining time will appear in
the control window for 5 seconds and then return the
comfort level setting.
HEAT
COOL
· Plug one end of the power cord into the
electric outlet, and plug the other end into
the AC/DC adapter plug on the unit
(the control panel will illuminate).
· Press the ON /OFF button (the fan and
pump will start and the digital display will
now say “ON”).
· Lift the handle.
· Gently peel back black rubber fill cap.
· Slowly pour
DISTILLED WATER
into the
reservoir under the fill cap (water
should drain through hole in the center
of the reservoir).
· Ensure you have filled between
“MIN” and “MAX” levels on the water
level indicator to maintain optimal
performance.
NOTE: Some pads come with
the tubing assembly pre-attached
to the pad. However, other pads
may require you to attach the
tubing assembly to both the unit
and the pad. Insert the connector
on the pad into the port on the
tubing assembly until you feel the
connector click and lock into place.
AC/DC
ADAPTER
PLUG
! BE SURE WATER
LEVEL IS BETWEEN
MIN AND MAX !
MAX
MI N
MODE
HEAT
COOL
COMFORT LEVEL
5
Tubing
Assembly
Instruction and Safety Manual for Your
Thermal Therapy Unit
www.imeconcepts.com
Item # 003-99
Warning: Read this Manual before using this product.
Failure to follow the instructions in this Manual may result in injury.
Keep this Manual in a safe location for future reference.
This User’s Manual is also available at www.therma-zone.com.
E
N
G
LI
S
H
Connector
Ports
Connector
Connector
Port
MODE
HEAT
COOL
COMFORT LEVEL
DISTILLED WATER RESERVOIR
HANDLE (R AISED)
CONNECTOR PORTS
AC/DC ADAPTER PLUG
! BE SURE WATER
LEVEL IS BETWEEN
MIN AND MAX !
MAX
MI N
