DOC NO. 81028
3 OF 11
Rev D 08/17/06 NJL
Generator Installation Instructions
Parts Enclosed
•
Steam generator / built-in control
•
Steam room sensor & 25 foot Lead wire
•
Polished chrome steamhead
Materials Needed
•
Brass ball valve
•
Pipe compound
•
Copper or brass nipples
(Size and quantities per Instructions)
•
In-line filter (recommended)
•
3/8” brass or copper union
•
Wire (sizes and quantities per Instructions)
•
Copper tubing or pipe
•
Wire cap nuts
•
Flex conduit
•
Brass or copper tee
Connection & plug
Tools Needed
•
Pipe wrench
•
Tubing cutter
•
Flaring tool (if flared fittings are used)
•
Pipe thread cap
•
Wire cutters or wire strippers
•
Adjustable wrench
•
Screwdrivers (Philips &Regular)
•
Solder & Flux
•
3/16” & 1.5” masonry drill bits
•
Drill motor
•
Propane Torch
•
Other tools as required
All Thermasol steam generators are designed
to build NO PRESSURE during operation.
This is for your safety.
NOTE:
Failure to follow instructions specifically
will cause warranty to be void.