9
OPERATING INSTRUCTIONS
REMOTE CONTROL
Operation of Main / Bathroom / Ensuite Controller
Please read these instructions carefully before using this appliance.
1. Turn on the ON/OFF button
2. The temperature display will read 42°C.
3. The priority indicator will illuminate.
4. Select hot water temperature by pushing UP/DOWN or button
on the controller.
5. Turn on the hot water tap or shower. Flame logo indicator will illuminate
after a short delay.
This indicator will remain illuminated until the hot water tap or shower
is turned off.
6. The hot water temperature can be altered at any time during the
operation by pushing
UP/DOWN button or located on the controller.
Main Remote Controller
Bathroom / Ensuite Remote Controller
Energy-saving Mode
If no data is adjusted within a period of approximately 25 minutes the
display becomes dim. This is energy-saving mode and not a failure.
Summary of Contents for 16NG50/16LP50
Page 2: ...2 OPERATING INSTRUCTIONS ...
Page 14: ...14 OPERATING INSTRUCTIONS ...
Page 15: ...15 OPERATING INSTRUCTIONS ...
Page 16: ...Works for you www reece com au thermann 20732910 ...