- 16 -
- 17 -
2-6 Wiring Remote Controller
1. Number of controllers
One, two or three remote controllers can be installed as optional extras.
2. Controller locations
The controllers allow the water temperature to be set from the various locations
where they are installed at kitchen, laundry, bathroom and ensuite.
3. Connection of wiring to the unit
Remove the front cover from the unit.
Install the wiring to the unit using conduit or by concealing the wires in the wall cavity.
Install the wiring into the cabinet through the conduit.
Attach the wiring to the plate adjacent to the terminal block, using the cable clamp
provided. Then attach the wires to the terminals for the remote controllers. Replace
the front cover of the water heater.
(One Cable)
(Two or more Cables)
CONTROLLER CABLE
CABLE CLAMP
CONTROLLER CABLE
CABLE CLAMP
(Small)
(Medium or Large)
REMOTE CONTROLLER
CONNECTION TERMINALS
REMOTE CONTROLLER
CONNECTION TERMINALS
Conduit
