2
THM0421 026512 Rev. E
Thermann Owner’s Manual
80L to 400L Electric Storage Water Heaters
Installation Details
Location
The water heater should be located
as close as possible to the most
frequently used hot water outlet.
Adequate access must be made for
service to the element(s), thermostat,
relief valve and anode. Ensure that the
data plate and associated warnings are
clearly visible.
Note:
All models are equipped with a
sacrificial anode, accessible through
the top cover. Allow 50% of the height
of the water heater for clearance
above to replace the anode.
The product must be installed on a
flat, solid supporting surface.
A properly drained overflow tray must
be used where property damage could
occur from water spillage. (See
AS/NZS3500.4 for further details.)
When installing this water heater in
a roof area as a mains pressure unit,
refer to local regulations.
Note: The warranty does not cover
damage due to leakage of the
water heater.
