2
www.thermaltronics.com support email: [email protected]
SAFETY PRECAUTIONS
Warning
A fire may result if this equipment is not used with care and for intended applications. To avoid
electric shock or injury, please follow the instructions below strictly:
1. The unit must be properly grounded.
2. The unit can reach extremely high temperatures when switched ON.
- Do not use the device near flammable materials or gases
- Do not touch heated parts, which can cause severe burns
- Do not point the nozzle towards any part of the body
3. Never operate the equipment with wet hands.
4. Always disconnect the power cord and allow the unit ample time to cooldown before performing
maintenance.
5. Use only genuine replacement parts.
6. Do not leave the appliance unattended when it is switched on.
Caution
1. Use this equipment in a well-ventilated area, away from combustible equipment.
2. Disconnect the power cord if the unit is not used for an extended period of time.
3. Place handle in stand when not in use.
4. Handle with care.
- Never drop or sharply jolt the unit.
- The unit contains delicate parts that can be damaged if subjected to physical force.
- Do not spill any liquids into the unit.
5. Do not operate on uneven surfaces.
6. Allow to cool down before storage.
7. Turn off the power when the unit is not in use.
8. Do not alter the unit in any manner.
9. When resting the handle in the handle holder, make sure there are no objects within 30cm of the
nozzle, as nearby objects maybe damaged.
10. Do not apply excessive force when installing and removing nozzles.
11. Do not use pliers to pull the edges of the nozzle.
12. Do not over tighten the screw when installing a new nozzle.
CONTROL PANEL
Reset Button
Decrease Air Flow Button
Temperature and Air Flow Display
Increase Temperature Button
Increase Air Flow Button
Decrease Temperature Button
