4
www.thermaltronics.com support email: [email protected]
UNPACKING/ASSEMBLY/OPERATION
Please read this manual and follow the directions before using the equipment.
The carton contains:
1. Instruction manual
2. Desolder Gun
3. Desolder Gun handpiece holder, including Brass curls and sponge
4. Tip removal pad
Important: Keep all shipping materials until satisfactory operation has been verified.
Assembly and Operation
1. Remove Desolder Gun from its packaging and place on a suitable work bench.
2. Attach the Desolder Gun handpiece cord onto the desolder gun.
3. Plug the other end of the handpiece cord into the System front connector.
4. Attach the airhose onto the desolder gun.
5. Attach the other end of the airhose to your air supply.
Note: For optimal performance set the air supply to 80 psi. Operating the desolder
tool at over 100 psi can cause the airhose to rupture.
6. Plug desolder tip into handpiece. Notice the tailpipe must be oriented down.
7. Turn the system on, the desolder tip should reach curie point temperature quickly.
8. When not in use place the desolder gun into the workstand.
Temperature Calibration
Thermaltronics “Curie Heat Technology” systems do not require temperature
calibration. The technology is very precise and is self regulating. The alloy used in the
construction of the tip cartridge will maintain the set temperature for its entire life.
Summary of Contents for TMT-2000S
Page 1: ...USER MANUAL DS KIT Desolder Kit www thermaltronics com ...
Page 2: ......
