3.4 USB 2.0 & IEEE 1394 Firewire Connection
Please consult your motherboard manual to find
out the section of "USB connection".
USB connection
3.2 Case LED Connection
On the front of the case, you can find some LEDs and switch leads
(POWER SW*1, POWER LED*1, H.D.D. LED*1, RESET SW*1)
Please consult user manual of your motherboard manufacturer, then
connect these leads to the panel header on the motherboard. These
leads are usually labeled; if not, please trace them back to the case
front to find out their source.
- POWER LED connects to your M/B at the PLED
- POWER SW connects to the PWR connector on the motherboard.
- H.D.D LED connects to the eSATA connector shown as picture(3.5)
-
RESET SW
connects to the RSW connector on the motherboard,
3.3 Case Open Alarm Connection
1
2
To find out the cable with 2pin
connector ("Micro SW") from the
rear of inside the chassis.
To find out the position of Chassis
Alarm on your motherboard.
(please consult your motherboard
manual)
White Wire
Black Wire
( Brank )
GND2
Data+2
Data-2
Vcc2
GND1
Data+1
Data-1
Vcc1
USB2.0
13
14
