©
2021 Thermaltake Technology Co., Ltd. All Rights Reserved.
www.thermaltake.com
Pacific A2 Ultra Memory Water Block
CL-W333-CU00SW-A
Installation Guide
Memory Module Installation Guide
1
3
2
3
4
Plug the complete memory module to
the DDR4 slot on the motherboard.
Please refer to the motherboard manual
for the installation location.
Remove the protective
film of Thermal Pad
from the Water Block(A).
Attach Thermal Pad(E)
to the Water Blcok
.
(A)
Tighten the Screws(I)
until memory module
are securely attached.
I
J
Connect the Controller
Cable to Water Block
Type 2
1
3
2
Remove the protecive film of Thermal Pad
from Heat Sink(B) and Heat Sink(C)
Attach Thermal Pad(D)
to the Heat Sink(B)
Attach Thermal Pad(D)
to the Heat Sink(C)
Install the RAMs on Heat Sink(B).
Please be aware of the direction and the position.
B
C
B
4
5
Finished
Use the Screws(H) to enclose the
HeatSink(B) and Heat Sink(C).
B
C
H
B
C
D
D
E
5
Install your fittings and tubes
