Thermal Intelligence BASECAMP, Operator'S Manual

Page: 17 / 30

Page 17
BASECAMP OPERATOR MANUAL
8. Maintenance
8.1 Maintenance Overview:
1. Top level maintenance is provided in this section. For detailed engine maintenance
procedures please refer to the Engine Owners Manual.
8.2 Maintenance Safety:
1. The following safety items are to protect the operator and heater during maintenance.
Failure to meet or exceed any of the following safety procedures will result in damage to
the heater, towing vehicle, other vehicles, property damage as well as serious injury or
death.
a. Place wheel chocks in front and behind the heater wheels to prevent accidental
movement during maintenance.
b. The area around the heater must be cleared of all unauthorized personnel.
c. Wear approved protective clothing and
safety glasses.
i. No loose clothing. No loose or
hanging jewelry. Long hair must
be secured.
d. Never weld on the heater unless
approved by Thermal Intelligence.
e. Do not replace any parts or tires except for parts from Thermal Intelligence or
tires with the same rating as the original equipment and meet the specifications.
f. Always use the correct tools when performing repairs or routine maintenance.
i. Using improper or inadequate tools can cause damage to the heater or
injury to the operator.
8.3 Engine Service Intervals
1. Long Run Tank: 2,500 Hours
2. Non – Long Run Tank:
a. Change oil after the initial 50 hours of operations and every 400 hours thereafter
b. Refer to Engine Owners Manual