Manual 0-2972
3-3
DESCRIPTION
1. Front Panel Controls and Features
• Main Power ON / OFF
Switch
• RUN
/RAPID AUTO RESTART
SET
Switch
• Output Current Control (
A
) Sets output current for drag cutting (up to 40 Amps for drag cutting (with the
torch tip in contact with the workpiece), or for standoff cutting.
2. Front Panel Indicators
•
AC When lighted, indicates AC input power is present in thepower supply.
•
TEMP When lighted, indicates the power supply is overheated.
•
GAS When lighted, indicates that adequate input air pressure for power supply operation is present.
•
DC When lighted, indicates that power supply output circuits are active.
NOTE
Minimum pressure for power supply operation is lower than minimum pressure for torch operation.
3. Dimensions and Weight
22.5"
0.57 m
58 lb / 26 kg
A-03700
10.75"
273 mm
16.375"
416 mm
