CONTROL PCB REPLACEMENT INSTRUCTIONS
0-5248 Rev AB
1
May 16, 2012
© 2012 by Thermadyne Industries
Kit Componants
The following components are included in this kit.
• Control Panel PCB Assembly
• Anti Static Strap
• Mounting Screws (4)
• Instructions
Control PCB Replacement
NOTE
This process is the same for the Fabricator and the Transmig units. Transmig is shown in these in-
structions.
1. Disconnect power from the power supply
2. Locate the anti static strap in this kit and follow instructions for proper use and fit it to your body.
3.
Remove four (4) Control Panel screws (#1).
#1
Art # A-1
Figure 1: Front Panel Screw Removal (Transmig shown)
Thermadyne Holdings Corporation
Suite 300, 16052 Swingley Ridge Road
St. Louis, MO 63017, USA
Telephone: 1-800-426-1888 • Fax: 1-800-535-0557
Email: [email protected]
www.thermalarc.com
Manual 0-5248
Control PCB Replacement and
Part Numbers for
Fabricator 252i US W7005381
Fabricator 252i EU W7005388
Transmig 250i W7005336
Assembly Instructions
