Thermadyne CE CutMaster 75, Service Manual

Page: 18 / 80

DESCRIPTION 3-2 Manual 0-2869
7. Pilot Circuitry
Capacitive Discharge (CD), Ignition DC Pilot
8. Weight
Power Supply w/Input Cable & Work Lead, Torch &
Leads 83 lbs. (37.6 kg). (85 lbs/38.5 kg for CE Cut-
Master 75).
9. Overall Dimensions (w/handles)
Length 27.4 (696 mm)
Width 12.4 (315 mm)
Height 17.3 (439 mm)
B. Gas Regulator/Filter Assembly
Specifications
The following specifications apply to the Gas Regulator/
Filter Assembly only:
1. Operating Pressure
70 psi (4.8 bar)
2. Maximum input gas supply pressure
125 psi (8.6 bar)
3. Filter
Particulate Type Filter (to 20 microns)
3.04 Power Supply Options and
Accessories
The following accessories are available for this power
supply. Refer to Section 6, Parts Lists, for catalog num-
bers and ordering information.
A. Single Stage Air Line Filter Kit
A Single Stage In-Line Air Filter for use with com-
pressed air shop systems. Filters moisture and par-
ticulate matter from the air stream to at least 0.85 mi-
crons.
B. Two Stage Air Line Filter
A Two Stage In-Line Air Filter for use on compressed
air shop systems. Filters moisture and particulate mat-
ter from the air stream to at least 5.0 microns.
C. Extended Work Cable with Clamp
As an alternative to the standard 20 ft (6.1 m) work
cable & clamp factory installed on the power supply,
an optional 50 ft (15.2 m) work cable with clamp is
available.
D. Hand Pendant Control (for machine
applications only)
A hand pendant control with 25 ft (7.6 m) cable which
provides ON/OFF signals to the power supply.
E. Hand Pendant Control Extension
Also offered is a 25 ft (7.6 m) extension cable which
when added to the Hand Pendant Control, provides
a total cable length of 50 ft (15.2 m).
F. Multi-Purpose Cart
Rugged steel cart on easy-rolling rear wheels and
front-mounted swivel casters. Provides maximum
mobility for the power supply and can also serve as a
display cart. Top shelf is 12 " (305 mm) x 20 (508 mm).
Steel handle is 30" (762 mm) high.