Service Manual for the Thermador Pro Harmony Range, Model PRL364GDH/01
58300000154022_ARA_EN_D
Page 63 of 68
6.5.9
Bottom Plate of Front Frame
– Removal and
Replacement
1. Follow all safety precautions and steps in
, page
3. Remove only the ends of the gasket from the respective holes in
the bottom plate of the front frame (see Figure 121). You do not
have to remove the entire gasket.
Figure 121: Removing the Gasket Ends
4. First remove the three T-20 screws from both the right and left
sides of the bottom plate of front frame (see Figure 122).
5. Then remove the T-20 screw from both the right and left sides of
the bottom plate of front frame (see Figure 123).
6. Remove the bottom plate of the front frame by pulling it out
horizontally (toward you).
Figure 122: Removing Initial Screws - Bottom Plate of Front Frame
Figure 123: Removing Next Screw - Bottom Plate of Front Frame