Service Manual for the Thermador Pro Harmony Range, Model PRL364GDH/01
58300000154022_ARA_EN_D
Page 58 of 68
6.5.3
Oven Temperature Sensor Removal and Replacement
The oven temperature sensor is located inside the oven cavity
(see Figure 112).
Figure 112: Sensor and Lamp Locations inside the Oven Cavity
1. Follow all safety precautions and steps in
, page
Backguard and Island Trim Removal
43).
, page
.
NOTE:
It is recommended to remove the door, to prevent weight
or force applied from damaging the door and latch components.
5. From the back of the range, at the left side, detach the connectors
to the purple and white sensor wires (see Figure 113).
6. From inside the oven cavity, remove and retain the two T-20
screws (see Figure 114).
Figure 113: Sensor Wire Connectors and Portal
Figure 114: Sensor