Service Manual for the Thermador Pro Harmony Range, Model PRL364GDH/01
58300000154022_ARA_EN_D
Page 49 of 68
Figure 88: Elbow Connector Attached to Gas Line
13. Now gently pull out the infrared broil burner from the ceiling of the
cavity. Be careful not to bend the orifice holder bracket at the end
of the Venturi tube (see Figure 89).
NOTE:
Do not detach the elbow connector and orifice from the
orifice holder bracket (see Figure 89). If the elbow connector or
orifice needs replacing, replace the broil burner assembly.
Figure 89: Venturi Tube Shown with Elbow Connector and Orifice
Attached to Bracket
6.4.7 Convection Components
– Removal and Replacement
The convection components are accessed from both the back and the
front of the range.
Figure 90: Convection Components