Service Manual for the Thermador Pro Harmony Range, Model PRL364GDH/01
58300000154022_ARA_EN_D
Page 21 of 68
9. Remove the following (see Figure 25):
■ Grease tray (move back, and then lift upward to remove from
griddle plate)
■ Griddle plate
Figure 25: Griddle Plate and Grease Tray
6.2.2
Removing the Maintops
Caution
Fragile Component
The porcelain enamel maintops are fragile. To prevent damage such
as chipping:
■ Carefully remove maintops
■ Do not over torque the screw holding the burner pedestal to the
maintop when reinstalling a maintop
1. Remove and retain the three T-20 screws located on the
front-facing side of the backguard (see Figure 26).
2. For each maintop, carefully place a tool such as a hook or a
non-straight Allen wrench in a circular receptacle on the maintop
(not in a receptacle for the jet holder or the ignition wire), and pry
up maintop enough until you can grasp it with your hand
(see Figure 27).
3. Push each ignition wire downward through its respective
receptacle, as you carefully lift out each maintop, in a frontward
direction.
Figure 26: Screws on Front of Backguard
Figure 27: Removing a Maintop