English 14
(1) screw and spacer to center hole location. (See
Figure 9.)
The spacer is necessary to create proper clearance
between the backguard rear panel and the back wall. The
spacer is not used with the Island Trim.
WARNING:
Fingers or hand could get pinched when
installing the backguard. Severe injury could
result. Use extreme caution and wear thick
protective gloves to avoid potential cut or
laceration to finger or hand while sliding the
backguard down onto the range.
WARNING:
To avoid possible burn or fire hazard, a
backguard designed specifically for this range
must be installed whenever the range is used.
CAUTION:
The Pot and Pan Shelf can get very hot! DO
NOT place the following items on top of the Pot
and Pan Shelf:
•
plastics or containers that can melt
•
flammable items
•
a total load over 30 pounds (13.6kg)
Figure 9: Backguard Installation
Backguard
Installed
Front of Unit
Spacer
Rear View
Front Face
Panel
Summary of Contents for PRO-GRAND PRG30
Page 23: ......
