Rack Positions
There are five positions with position one starting at the bottom of the oven. Rack positions are called out throughout the manual
to help optimize cooking performance.
Note:
Always place the Universal Pan on Rack 1 when using Full Steam.
Setting Temperature Offset
If your foods consistently fail to cook to your desired doneness,
you can offset the temperature of the oven from
-35°F to +35°F (+20°C to -20°C) in the setting menu.
1.
Touch the SETTINGS touch button.
2.
Swipe and select Temperature offset.
3.
Touch 0 in bottom line and swipe to left or right to select
offset temperature.
4.
Touch top line to select.
5.
Touch SETTINGS.
6.
Touch Save to confirm temperature offset.
Selecting a Heating Mode
1.
Turn the function selector to the desired heating mode.
2.
Turn the temperature selector to the desired temperature.
After a few seconds the appliance starts operation.
The status bar appears in the display to indicate preheating
progress.
1
2
3
4
5
5
Broiling vegetables (peppers, onions, tomatoes)
Use universal or unperforated pan.
4
Browning bread.
3
Broiling meats, cakes, cookies, cupcakes, bisuits, pizza, frozen
convenience foods, casseroles, broiling.
2
Pie, cheesecake, loaf bread, poultry, meats
1
Turkey, angel food cake
Note:
Use racks 1 & 3 for two rack baking and steaming.
Use racks 1, 2, & 3 for three rack baking.
Steam Assisted Cooking
When cooking with steam assistance, steam is introduced into
the oven cavity at various intervals and with varying degrees of
intensity.
You can add Steam for these heating modes
:
• True Convection
‚
• Convection Bake
¶
• Bake
ƒ
• Speed Convection
÷
• Convection Roast
þ
• Roast
ü
Start:
1.
Refill water tank.
Note:
Only switch on the Add Steam setting once the oven
cavity has completely cooled down (to room temperature).
2. Set heating mode and temperature with the knobs.
3. Touch the ADD STEAM touch button to switch on steam
assistance.
4. On the display, swipe and select steam intensity.
5. Touch the
8
symbol to apply the setting.
6. The appliance starts the operation.
Easy Clean
The Easy Clean function can only be started once the oven
cavity is cold (room temperature) and the appliance door is
closed. Do not open the appliance door during this operation.
Doing this will interrupt the Easy Clean function.
1.
Remove the accessories and racks from the oven cavity.
2.
Turn the function selector to CLEAN MODES
3.
Swipe to the left or right to select “Easy Clean
š
”.
Touch the bottom line.
After a few seconds the appliance start the Easy Clean
function. The remaining time appears on the display.
Cleaning your Oven