Page 12
Figure 14
6. Close j-box cover. Re-
place filters as described in
the Care & Use section of
this manual. Turn power on
at service panel. Check
operation of the hood.
Remote Blower
Remote Blower
Remote Blower
Remote Blower
Remote Blower
Installation:
Installation:
Installation:
Installation:
Installation:
The PHE hood is designed to
work with Thermador’s
VTR600R, VTR1000Q, and
VTR1400Q remote blowers.
For installation instructions
see the instructions supplied
with the blower unit.
W
W W W Wiring the PHE with airing the PHE with airing the PHE with airing the PHE with airing the PHE with a
Remote Blower:
Remote Blower:
Remote Blower:
Remote Blower:
Remote Blower:
W
W W W Wararararar
ning: Tur
ning: Tur
ning: Tur
ning: Tur
ning: Turn ofn ofn ofn ofn of
f electric-
f electric-
f electric-
f electric-
f electric-
ity at the service panel
ity at the service panel
ity at the service panel
ity at the service panel
ity at the service panel
befor
befor
befor
befor
before wiring the unit.e wiring the unit.e wiring the unit.e wiring the unit.e wiring the unit.
1. Remove the j-box cover
as shown in Figure 15.
2. Remove cover
T T T T T
from the
j-box.
3. Remove the 2 knockouts
and install 1/2” conduit
connectors.
4. Run black, white, and
green wir
es (#16 AWG) in
1/2” conduit from power
supply to j-box.
Figure 15
5. Connect black, white,
and green wir
es from power
supply to black, white, and
green/yellow wir
es in j-box
respectively.
