English 4
NOTE:
All measurements given have to be precisely followed. If
nonstandard cabinets are used, make sure they are
installed with minimum dimensions
shown in Figure 1 and
Figure 2
.
Plan the installation of the unit so that the power cord, gas
shut-off valve and gas pressure regulator are accessible
from the front of cabinet.
Countertop Requirements
Mounting Requirements
Use the mounting brackets supplied.
See “Install the
Cooktop” on page 5 for further details
.
Ventilation Recommendations
We strongly recommend the installation of a ventilation
hood above this appliance. The hood must be installed
according to instructions furnished with the hood.
Installation Procedure
WARNING:
To avoid electrical shock hazard, before
installing the cooktop, switch power off at the
service panel to prevent the power from being
switched on accidentally.
Figure 1:
Installed Dimensions (from Cooktop Edges
)
Depth from Back Wall
Cabinet 13" (33cm) max.
Hood Depth - 24" (61cm) max.
Centered Over Cooktop
Rear Wall - 1-3/4"(4cm)
Right Side
12" (30cm) min.
Left Side
12" (30cm) min.
18" (46cm) min.
Above Counter - 30" (76 cm) min. to
Combustible Surface
SGS(X)30 - 30" (76cm) min.
SGS(X)36 - 36" (91cm) min.
Figure 2: Cutout Dimensions
30” Models
36” Models
Summary of Contents for Masterpiece SGS304FS
Page 1: ...INSTALLATION MANUAL Gas Cooktops Models SGS SGSX ...
Page 11: ......
