1.800.735.4328 | THERMADOR.COM
COOKTOPS —
e
Le
CT
r
IC
119
eLeCTrICAL SPeCIFICATIONS
Be sure your appliance is properly installed and grounded by a qualified
technician. Installation, electrical connections and grounding must comply
with all applicable local codes.
All Thermador Electric Cooktops are dual rated, designed to be connected to
either 240/208V AC, 60 Hz, 3-wire, single-phase power supply.
Install a suitable conduit box (not furnished). An appropriately-sized,
UL-listed conduit connector must be used to correctly attach the conduit
to the junction box.
mODeL OPTIONS
There are two sizes of Masterpiece
®
Electric Cooktops
to choose from — 30-inch and 36-inch. Models are
available with mechanical controls and touch controls
in a variety of cooktop configurations to fit your client‘s
cooking style. In addition, you can choose models with
our exclusive SensorDome
™
system which monitors the
temperature of foods to ensure perfect cooking results
every time. Be sure to reference the correct model
information in this design guide.
INSTALLATION CONSIDerATIONS
The information in this design guide provides key
features, product dimensions, cutouts and installation
specifications. Before installing a Thermador
Masterpiece Electric Cooktop, be sure to verify the
cutout dimensions and electrical connections. Also,
always consult with the installation manual packed with
the product for complete details before installing.
Thermador Masterpiece Electric Cooktops may be
installed above a Thermador Single Built-in Oven as
long as there is no contact between the bottom of the
cooktop and the top of the oven.
Thermador Masterpiece Electric Cooktops may also
be installed above a Thermador Warming Drawer
to create a convenient cooking center. Refer to the
warming drawer section for additional specifications.
Solid surface countertops require a special cutout
size and installation. For example, heat reflective tape
or rounded corners may be necessary. Contact the
countertop manufacturer for instructions specific to
your countertop.
We strongly recommend the installation of a
Thermador Ventilation System with all Masterpiece
Electric Cooktops. Refer to the ventilation section for
specifications.
WArrANTY
Limited warranty parts and labor (2 year)
Limited warranty for glass ceramic surface/electronic
elements and switches; Parts only (2nd to 5th year)
See page 308 for additional warranty details.
eLeCTrIC COOKTOPS
PLANNING INFOrmATION
mODeL
reQuIreD CIrCuIT breAKer
240V, 3-Wire, 60 Hz
208V, 3-Wire, 60 Hz
CEM304FS
40 Amp
30 Amp
CES304FS
40 Amp
30 Amp
CET304FS
40 Amp
30 Amp
CEM365FS
50 Amp
50 Amp
CES365FS
50 Amp
40 Amp
CES366FS
50 Amp
40 Amp
CET366FS
50 Amp
40 Amp
ImPOrTANT:
Local Codes may vary; installation, electrical connections and
grounding must comply with all applicable local codes. If required by the
National Electrical Code (or Canadian Electrical Code), this appliance must be
installed on a separate branch circuit.
eLeCTrICAL LOCATION
The junction box must be located
within 3 feet (~900 mm) of the
cooktop connection. It should be
easily accessible for service purposes.
CAbINeT reQuIremeNTS
The distance from the top of the
cooktop to the bottom of the
cabinets above it must be A = 30"
(762 mm) minimum. This distance
can be reduced to A = 24" (610 mm)
when the bottom of the wood or
metal cabinet is protected by not less
than
1
/
4
" (6.35 mm) flame retardant
millboard, covered by no. 28 steel
sheet 0.015 (.4 mm) thick stainless
steel, 0.024" (0.6 mm) aluminum,
or 0.020" (0.5 mm) thick copper, at
a minimum. Verify that the cabinets
above the cooktop are a maximum
of B = 13" (330 mm) deep.
